...
Aberdeen · Offices, retail, hospitality & industrial · NICEIC

Commercial electrician in Aberdeen, from installation to compliance.

NICEIC approved commercial and industrial electricians for Aberdeen businesses. Installation and maintenance, fixed wire testing from £300 + VAT, emergency lighting, three-phase power and full fit-outs, for offices, shops, bars, kitchens and the industrial estates. We plan the work around your trading hours so certification and repairs get done without shutting the business. Every job to BS 7671, signed by Steven Watt.

★★★★★
5.0 from 100+ Google reviews · NICEIC Approved · SELECT · £2M insured
NICEICApproved Contractor
From £300Fixed wire test + VAT
Three-phaseInstalls & boards
Out of hoursAround your trading
BS 767118th Edition
What We Do

Commercial electrical work across Aberdeen.

The full range for a business premises, from a single board upgrade to a complete fit-out, with the deeper single services linked to their own pages.

Commercial & industrial installation

New circuits, distribution boards, machinery and plant power, workshop and warehouse power, and containment through offices, retail and industrial units.

Fixed wire testing & commercial EICR

Periodic inspection and testing of your fixed installation to BS 7671. From £300 + VAT. See the commercial EICR page for intervals and detail.

Emergency lighting

Design, installation, and the monthly and annual testing and certification your premises needs under BS 5266.

Three-phase & distribution boards

Three-phase supplies, board installs and upgrades, sub-mains, isolators and load balancing for heavier commercial loads.

Fit-outs & refurbishments

Office, retail and hospitality fit-outs, lighting, power, containment and board works, sequenced around the trade.

LED lighting upgrades

Lower running costs and better light levels for workspaces and retail, with far less maintenance than the fittings they replace.

Workplace & fleet EV charging

Commercial, destination and fleet charging with load management and three-phase feeds. See the EV charger page for detail.

Planned maintenance & callouts

Maintenance schedules, fault finding, remedials and minor works, done outside your trading hours where needed.

Compliance Testing

Fixed wire testing, the certificate your business must keep current.

Fixed wire testing is the commercial equivalent of a domestic EICR, a periodic inspection and test of the fixed electrical installation in your premises against BS 7671. It is what proves your electrics are safe and maintained, and it is driven by the Electricity at Work Regulations 1989, which put a duty on the employer or duty holder to keep the installation in a safe condition.

The recommended maximum intervals are broadly every five years for most commercial premises such as offices, shops and hotels, and every three years for industrial premises and factories, with wet or harsh environments often needing annual testing. The important caveat is that your insurer and your lease frequently ask for shorter intervals than that, so it is always worth checking the policy and the lease rather than assuming the maximum.

We test single phase and three phase installations, price per circuit from £300 + VAT for a small office, and issue the certificate you need for your insurer, landlord or lease. The full intervals and pricing are on our commercial EICR page.

Circuit schedule recorded during commercial fixed wire testing at an Aberdeen premises
Emergency Lighting

Emergency lighting to BS 5266, installed, tested and certified.

If your premises has escape routes that the public or your staff use, you almost certainly need emergency lighting, and it carries its own testing duty under BS 5266. It is easy to install it and then forget it, right up until an insurer or a fire risk assessment asks for the records.

The duty has two parts. A monthly function test, where each fitting is briefly run from its battery to confirm it illuminates and the exit signage is lit and legible. And an annual full duration test, where the mains is isolated and the fittings must run for their full rated duration, typically three hours, to prove they would actually last through an evacuation. Both are recorded in an emergency lighting logbook. We design and install emergency lighting for new fit-outs and refurbishments, take on the monthly and annual testing, and keep the logbook straight so the records are there when they are asked for.

Power & Boards

Three-phase power and distribution boards.

Most homes and small units run on single phase at 230 volts, which is fine for lighting and everyday sockets. Workshops, larger offices, commercial kitchens, heavy machinery and banks of EV chargers often need three phase at 400 volts, which gives more capacity and balances heavier loads properly. If you are not sure which you have, we can check the supply and advise before you commit to new equipment.

We install and upgrade distribution boards, run sub-mains, fit isolators, and balance loads across the phases, and where a premises needs its supply upgrading from single to three phase we coordinate that with the network operator, SSEN, on your behalf. Where a board is simply at the end of its life, our board replacement page covers that side.

Three phase distribution board in an Aberdeen commercial premises
Fit-Out & Downtime

Fit-outs, upgrades and maintenance, without shutting the doors.

The thing a facilities manager actually worries about is not the electrics, it is the disruption to trading. So we plan around it. Testing, remedials, board changes and installations are scheduled outside your trading hours or as phased shutdowns, with safe isolation in a live environment, so the shop, office or kitchen keeps running while the work gets done.

On the installation side we handle office, retail and hospitality fit-outs and refurbishments, the lighting, power, containment and board works that a new space needs, and LED lighting upgrades that cut your running costs and give better light levels with far less maintenance. On the ongoing side we run planned maintenance schedules and reactive callouts, and take on the minor works and remedials that keep a premises right between inspections. Our maintenance and inspection page covers ongoing cover in full.

LED lighting upgrade in a commercial space cutting running costs
Plain English

What your business is actually responsible for.

The certificates your insurer, landlord or lease asks for are not arbitrary. Here is the duty map, without the jargon.

Fixed wire testing

The duty: keep the installation safe and maintained under the Electricity at Work Regulations 1989.

The proof: a fixed wire test, roughly every five years for commercial and three for industrial, sooner if your insurer or lease says so.

Emergency lighting

The duty: escape routes lit if the power fails, under BS 5266.

The proof: a monthly function test and an annual full duration test, logged in the emergency lighting logbook.

Appliance testing

The duty: the plug in equipment you provide is safe to use.

The proof: in service testing of that equipment on risk based intervals, alongside the fixed wire test.

Landlords of units

The duty: the fixed installation of the units and common parts you let is safe.

The proof: current fixed wire certification for the demise and the communal supplies.

One point worth knowing: there is no Part P in Scotland. Part P is part of the Building Regulations for England and Wales. Notifiable electrical work in Scotland runs through Building Standards and a building warrant, and is certified to BS 7671 by a registered electrician.

Who We Work For

Trusted across Aberdeen's sectors.

We work for businesses right across the city, from the energy and oil and gas supply chain and its contractors, to harbour and marine adjacent operations, city centre offices and Union Street retail, and the bars, restaurants and hotels of the hospitality trade.

Much of our commercial work sits on the industrial estates, at Altens, Tullos, Dyce and the airport, Bridge of Don and Westhill, alongside the offices and shops of the centre. Wherever your premises is, the coverage and travel are set out on our areas we cover page.

  • NICEIC Approved Contractor and SELECT member
  • Inspection and testing to City and Guilds 2391-52
  • Every installation to BS 7671, the 18th Edition
  • £2M public liability, Faithful Spark Electricians Ltd
Commercial electrician inspecting an older installation at an Aberdeen business premises
FAQs

Commercial electrician questions, answered.

Don't see yours? Call 07304 027013 or get in touch. We come back the same business day.

How often does my Aberdeen business need fixed wire testing?

The recommended maximum is broadly every five years for most commercial premises and every three years for industrial premises and factories, with wet or harsh environments often needing annual testing. The duty comes from the Electricity at Work Regulations 1989. Your insurer and your lease often ask for shorter intervals, so it is worth checking both.

How much does commercial fixed wire testing cost?

From £300 + VAT for a small office. Larger sites are priced per circuit or point and quoted after a quick look at the premises, since the number of boards, the number of circuits, access and any out-of-hours working all affect it. No two commercial installations are the same, so we quote to yours.

Do I legally need an EICR or fixed wire test for my business?

You have a duty under the Electricity at Work Regulations 1989 to keep the installation safe and maintained, and periodic fixed wire testing is how you demonstrate that you have. On top of the law, your business insurer and your commercial lease very often require current certification, and a lapsed certificate can put both at risk.

How often does emergency lighting need testing?

Under BS 5266 you need a monthly function test, where each fitting is briefly run from its battery, and a full duration test once a year, where the fittings must run for their rated duration, usually three hours. Both go in a logbook. We can install, test and certify it, and keep the records straight.

Can you work outside our trading hours to avoid disruption?

Yes. We plan testing, maintenance and installation work around your trading hours or as phased shutdowns, with safe isolation in a live environment, so your shop, office or kitchen keeps running while the work gets done.

Do you work with three-phase power?

Yes. We install and upgrade three-phase supplies, distribution boards, sub-mains, isolators and machinery power, including banks of EV chargers, and we coordinate any supply upgrade from single to three phase with SSEN.

How do I know if I have single-phase or three-phase?

Most small units are single-phase at 230 volts, while workshops, larger offices, commercial kitchens, heavy machinery and EV banks often need three-phase at 400 volts. If you are not sure, we can check your supply and advise before you buy equipment that may need more capacity.

I am a commercial landlord letting units. What am I responsible for?

The fixed installation of the units and the common parts you let. That means current fixed wire certification for the demise and the communal supplies, and emergency lighting where the escape routes need it. We can test a portfolio of units together and send the certificates to your managing agent.

Do you install EV charging for workplaces and fleets?

Yes. We fit workplace, destination and fleet charging with load management and three-phase feeds where needed. The detail is on our EV charger page, and we integrate it with the rest of your commercial installation.

Are you qualified and insured for commercial work?

Yes. Faithful Spark Electricians is an NICEIC approved contractor and a SELECT member, our inspection and testing work is signed to City and Guilds 2391-52, every installation is to BS 7671, and we carry £2M public liability insurance.

Get a commercial electrical quote.

Call Steven directly on 07304 027013, message us on WhatsApp, or use the form. Tell us the premises and the work, whether it is a fixed wire test for your insurer, an emergency lighting contract, a fit-out or a board upgrade, and we will arrange a site visit and quote it to your premises. NICEIC approved, SELECT member, BS 7671, £2M insured. We work around your trading hours.

Request a Commercial Quote

Faithful Spark Electricians Ltd · Commercial electricians across Aberdeen & the North East · NICEIC Approved Contractor · SELECT Member · City and Guilds 2391-52, 2382-22, 2365-03, 2921-34 · BS 7671 18th Edition · £2M public liability insured